Permit Requirements for Kevin, Montana
For Plumbing projects in Kevin, determining the correct permitting authority depends on whether the project site is located within the incorporated city limits or in an unincorporated area of Toole County.
Authority Having Jurisdiction (AHJ)
Most jurisdictions require permits for Plumbing work to ensure safety and code compliance. The governing body responsible for issuing these permits varies by specific location:
General Plumbing Guidelines
Permits are usually required for new installations, structural modifications, or major repairs. While minor maintenance or cosmetic updates may be exempt, landowners should always verify local codes before work begins.
Help Us Improve This Guide
If you have found a direct link to a permit portal or a specific local ordinance for Plumbing in this area, please submit an update.
Because Kevin is located within Toole County, the following broader county regulations may also apply to your project:
Montana, Toole County Plumbing Permit Regulations and County Ordinances for Unincorporated Areas
Toole County, Montana Plumbing Permit Requirements
In Toole County, Montana, plumbing permit requirements for properties in unincorporated areas are primarily handled by the state of Montana, as the county may not have its own certified building code enforcement program. The state adopts the 2021 Uniform Plumbing Code (UPC) with amendments as its foundational technical reference for plumbing installations. A plumbing permit is generally required for new water supply installations and for alterations that extend, reroute, or replace supply lines. Licensed installation by a master or journeyman plumber is mandatory for all plumbing work. Homeowners performing work on their own primary residence may be exempt under certain conditions, but this should be verified. Farms, ranches, mines, mills, smelters, railroads, and public utilities are exempt from state plumbing permit requirements.
Jurisdiction and Enforcement
- For properties in unincorporated areas of Toole County, the Montana Building Codes Bureau (State) typically acts as the Authority Having Jurisdiction (AHJ) for building and plumbing permits, unless the county has established its own certified program.
- The state of Montana has adopted the 2021 Uniform Plumbing Code (UPC) as amended by the Montana Administrative Rules (ARM).
- Plumbing permits are issued through local building departments or, in unincorporated areas, through the DLI's state plumbing program.
Rules for Properties in Unincorporated Areas
- Plumbing work must be performed or supervised by a licensed journeyman or master plumber.
- Permits are required for new water supply installations and for alterations that extend, reroute, or replace supply lines.
- The state of Montana enforces plumbing code requirements, and a plumbing permit is necessary for most new plumbing installations and significant alterations.
- Exemptions may apply for homeowners performing work on their own personal residence, but verification with the relevant authority is recommended.
- Farms, ranches, mines, mills, smelters, railroads, and public utilities are exempt from state plumbing permit requirements.
- Inspections are a critical part of the process, with rough-in and final inspections typically required before covering plumbing work.
Resources to Learn More
The following statewide building codes and regulations apply universally to all jurisdictions within Montana:
Montana Plumbing Legislation, Codes, and Guidelines
State-Level Plumbing Codes in Montana
The State of Montana adopts and enforces the Uniform Plumbing Code (UPC), 2021 Edition. This code is incorporated by reference into the Administrative Rules of Montana (ARM), specifically under Title 24, Chapter 301, Subchapter 3. The state also adopts various appendices to the UPC to address specific requirements, such as water supply sizing, alternate plumbing systems, and sustainable practices.
Regulatory Agencies and Boards
Plumbing regulation in Montana is primarily managed by the Montana Department of Labor & Industry (DLI) through the following entities:
- Building Codes Program: Located within the DLI's Business Standards Division, this program is responsible for the statewide adoption and enforcement of building codes, including plumbing. It handles permitting and inspections for areas of the state that do not have their own certified local enforcement programs.
- Montana Board of Plumbers: This board is responsible for the licensing and regulation of plumbing professionals in the state, including apprentice, journeyman, and master plumbers. It operates under the DLI to ensure that individuals performing plumbing work meet the necessary qualifications and standards.
Resources to Learn More